$250 – Richmond Hill, Thornhill, Maple, Woodbridge

$300 – Aurora, Brampton, Etobikoke, Gormley, King City, Kleinburg, North York (Steeles to 401/Black Creek Dr to Victoria Park), Markham, Mississauga(East of Winston Churchill), Scarborough, Vaughan,

$400 – Ajax, Bolton, Caledon, Newmarket, Nobleton, Pickering, Schomberg, Whitchurch-Stouffville, North York (401 to Eglington/407 to Victoria Park

$500 – Bradford, Brooklin, Burlington, Downtown Toronto (Eglington to Lakeshore/Jane St to Victoria Park), East Gwillimbury, Mount Albert, Milton, Mississauga (West of Winston Churchill) Uxbridge, Whitby, Oakville

** Our minimum charge is not a base price; you will either pay the minimum charge or the total price of the job – whichever is greater.

** Please note not all service area boundaries line up with the city boundaries. To get an accurate minimum charge for your address consult the map or feel free to give us a call.  

 

Equipped to work with variety of posts

** Prices include the cement to set the posts but not the posts themselves– client will need to supply them. Posts set directly into the ground 42” deep, based on client marking out the location – approximately 8’ apart, no precise measurement

Pressure Treated wood posts:

4×4 posts – 10’ long posts set 42” deep:
Set in an 8” hole = $30 each
Set in a 10” hole = $60 each

6×6 posts – 10’ long posts set 42” deep:
Set in a 10” hole = $40 each
Set in a 12” hole = $70 each

Sizes available: 6”-36” wide, up to 6’ deep*

** Prices include the cement to set the sonotubes but not the sonotubes or brackets – client will need to supply them. Holes dug to standard dig depth of 4’ based on client marking out location of the footings

8” x 4’ deep = $40 each
10” x 4’ deep = $60 each
12” x 4’ deep = $90 each

*6′ depth not available for every size

Sizes available: from 6”-36” depth up to 6’ deep*

** Prices reflect the price to dig holes to standard 4’ deep and based on client marking out the location

6”/8” x 4’ deep = $20 each

10” x 4’ deep = $25 each

12” x 4’ deep = $30 each

*6′ depth not available for all sizes

Our price for a helical pile installation varies depending on the size needed and the amount needed. In order to provide you with an accurate estimate we just need a rough drawing of the project that includes clear dimensions or even engineer stamped plans. If you don’t have an engineer stamped plan and want one for your project then we can also provide you with one.

Please feel free to contact us via phone or email to inquire more information regarding helical piles or for a free estimate.

Prices reflect a base estimate and are subject to change based on job details.
Other services available
Contact us to discuss your project !!

Need An Estimate?

Contact us today to get a free estimate for any job. Click the button below to go to our online contact form. We aim to respond to all submissions with a detailed quote within 24 hours